Crosscut Sharpening Services

$25/hour

Saw shop is now closed for the summer season, it will be back up and running this winter. Shop space fills up quickly, so if you are considering having your saw sharpened, it’s best to reserve a spot on the winter sharpening schedule.

Please click here to send me a message.

I sharpen one and two man crosscut saws.   Sharpening includes cleaning, straightening, jointing (with a long jointer), shaping and filing rakers, swaging rakers, sharpening and setting the cutter teeth.  The result is an extremely sharp, efficient and smooth running saw.  Most saws take about four to six hours, depending on the condition of the saw.  An hour per foot of saw length is a good estimate.    

  I am able to accept payments by credit card, Paypal or check.  
If you want to pay with a credit card and you have received an invoice from me, click the link below to enter your payment information.

PAY FOR SHARPENING SERVICES HERE

  
Shipping Information:
 
How To Package Your Saw For Shipping:  Remove all handles and hardware from your saw. Send only the metal blade.  Sandwich the saw between two pieces of 1/4" plywood for shipping. You will need 2 pieces of plywood each one 2” longer than your saw and 2” wider than the widest dimension. Stack the 2 pieces of plywood together and lay your saw on top. Drill bolt holes through the handle holes and a middle hole in a gullet, near the tooth tips. Don’t drill where bolts will contact teeth. Put the saw between the pieces of plywood and bolt it all together. Tape securely. If shipping more than one saw, make sure they are all secured with bolts through handle holes and put cardboard between the saws. Saws can be shipped via USPS, FedEx or UPS. Contact them for shipping charges, USPS is usually the cheapest option if you keep your package under 84 total inches (length+width+height).  Please send me an email when you ship your saw so I can be on the lookout for it. In general I set lighter one man and falling saws to .012" for the teeth and rakers, larger bucking saws I set to .015 for teeth and rakers.  If you would like your saw set differently for a specific need, please let me know.

Ship saws to: 
Lisa Eversgerd
7 Triple Creek RD
  Oroville, WA 98844

Click here to contact me for more information.